wwa 3-in-1 digital led tape

https://www.gree-leds.com/white&wwa-digital-strip/custom-color-digital-led-strip.html
white+white+amber 3 color in 1 magic led strip
Features
1. Input Voltage DC24V, single signal (data) control.
2. External UCS1903 IC control, each six leds are programmable.
3. 48leds/m,60leds/m,72leds/m available, W/WW/A,W/W/A or WW/WW/A Color available
4. 125mm/4.92",100mm/3.94",83.3mm/3.28"intervals cutting point
5. White PCB/Black PCB available. IP21/IP65/IP67/IP68 available.
6. Both ends wired with 150mm/5.9" 20Awg wire and JST 3Pin male/female connector
7. 3M adhensive tape stick on the back of non-waterproof version.
8. Controller System：SD controller , DMX controller , Artnet.
https://www.gree-leds.com/white&wwa-digital-strip/custom-color-digital-led-strip.html

SMD3020 Mini GE8812 Digital RGB led strip with lens

GE8812 embedded SMD3020 side emitting digital led tape
Features
1. Input Voltage DC5V, Single signal (data) control.
2. GE8812 IC embedded in mini SMD3020 sideview RGB LED, it is with mini lens
3. The IC protocol with WS2812B/WS2811/SK6812
4. 60leds/m, Available,each led is programmable.
5. 16.6mm/0.65”, intervals cutting point
6. 8mm PCB,White/Black PCB available.
7. Both ends wired with 150mm/5.9" 20Awg wire and JST 3Pin male/female connector
8. 3M adhensive tape stick on the back of non-waterproof version.
9. Controller System：SD controller , DMX controller , Artnet.
https://www.gree-leds.com/sideviw&mini-&s-digital-strip/side-emitting-rgb-tape-digital.html

sk6813 pixel strip break point signal continuously,30/60/144leds per meter,DC12V

SK6813 individual neopixel controllable led strip rope
marketing@gree-leds.com
https://www.gree-leds.com/12v--digital-tape/sk6813-strip-individual-pixel-controllable.html
Features
1. Input Voltage DC12V, single signal (DI) control.
2. Signal breakpoint transmission, any fault pixel won‘t affect signal transmission ,unless two consecutive adjacent fault LED.
3. SK6813 IC embedded in SMD5050 RGB LED. Each led is programmable.
4. 30leds/m,60leds/m,144leds/m available.
5. 33.3mm/1.31",16.6mm/0.65",6.9mm/0.27" intervals cutting point
6. White PCB/Black PCB available, IP21/IP65/IP67/IP68 available.
7. Both ends wired with 150mm/5.9" 20Awg wire and JST 4Pin male/female connector
8. 3M adhensive tape stick on the back of non-waterproof version.
9. Controller System：SD controller , DMX controller , Artnet.
10. Only DI wired to controller' data . BI is for the chip's breakpoint resume function when we resolder PCB

100pcs ws2815 neopixel 12v led strip tape

ws2815 led strip 12v 100pixel/m,Signal breakpoint transmission,
marketing@gree-leds.com
Features
1. Input Voltage DC12V, single signal (DI) control.
2. Signal breakpoint transmission, any fault pixel won't affect signal transmission ,unless two consecutive adjacent fault LED.
3. WS2815 IC embedded in SMD5050 RGB LED. Each led is programmable.
4. 100LEDS/M,Each led addressable
5. 10mm/0.393' intervals cutting point
6. White PCB/Black PCB available, IP21/IP65/IP67/IP68 available.
7. Both ends wired with 150mm/5.9' 20Awg wire and JST 4Pin male/female connector
8. 3M adhensive tape stick on the back of non-waterproof version.
9. Controller System: SD controller , DMX controller , Artnet.
10. Only DI wired to controller' data . BI is for the chip's breakpoint resume function when we resolder PCB

flicker free refresh rate led strip tape

12v individual-pixel tape light
ws2815 60leds/m strip
flicker free refresh rate

Model No: GE60RGB2815A (Non-waterproof)

GE60RGB2815B(IP65 waterproof)

GE60RGB2815C(IP67 waterproof)

DC12V individual addressable RGB led strip

WS2815 is built in electric capacitor

SMD5050 60leds/m, Each led addressable

10mm width PCB, White or Black PCB

Breakpoint continuous, In case of single pixel damage, the next pixels will keep working

Achieve 256 level brightness display, 

and 16777216 color true color display port scanning frequency at 2 KHz/s.

IP Rank:IP20/IP65/IP67

Length: 5meter/Roll

90leds/m smd3535 sk6812 ws2812b mini led tape strip

5mm Slim digital led strip

Features
1. Input Voltage DC5V, Single signal (data) control.
2. SK6812/WS2812B IC embedded in SMD3535 Mini RGB LED,
3. 90leds/m,11.11mm/0.437" intervals cutting point
4. 5mm width mini PCB. each led is programmable.
5. White PCB/Black PCB available.
6. Both ends wired with 150mm/5.9" 20Awg wire and JST 3Pin male/female connector
7. 3M adhensive tape stick on the back of non-waterproof version.
8. Controller System：SD controller , DMX controller , Artnet.
https://www.gree-leds.com/sideviw&mini-&s-digital-strip/5mm-slim-digital-led-strip.html

SM16704 24V RGBW Addressable Led Strip 60leds/m

24V Digital RGBW led strip

Features
1. Input Voltage DC24V, Single signal (data) control.
2. External SM16704 IC control,each six leds are programmable.
3. 60leds/m RGB+3000K,RGB+4200K,RGB+6000K available.
4. 100mm/3.93" intervals cutting point
5. White PCB/Black PCB available. IP21/IP65/IP67/IP68 available.
6. Both ends wired with 150mm/5.9" 20Awg wire and JST 3Pin male/female connector
7. 3M adhensive tape stick on the back of non-waterproof version.
8. Controller System：SD controller , DMX controller , Artnet.

How To Wire With DMX512 Digital Led Strip When Editting Address And Controlling

How To Wire With DMX512 Digital Led Strip

When Editting Address And Controlling

DMX512 protocol was first developed by USITT (American Theatre Technology Association) to control dimmer from console with standard digital interface. DMX512 surpasses the analog system, but it can not completely replace the analog system. 
    The simplicity, reliability and flexibility of DMX512 make it is first choice of protocol when funds permit. DMX512 is still a new field of science, which is based on rules.DMX512 console control analog led strip light drawing. 

At present, A type of led strip called DMX512 digital led strip is designed based on DMX512 protocol. Its appearance is similar to the addressable led strip controlled by SPI signal. But the designer implants the DMX512 decoding module in the control chip, And the console can directly control the led strip lights. The drawing as below:

Greeled DMX512 digital led strips have two different types: single-line and double-line types.

Single-line DMX512 addressable led strips are controlled by "A" signal of console. These led strips have no DMX512 decoding module in chips. So we have to add external mini DMX512 to RS485 decoder at Inputting of led strip.

https://www.gree-leds.com/dmx512-digital-tape/5v-ucs512b-dmx-strip.html

Double line DMX512 addressable led strip are controlled by AB differential signal. Then Stardard DMX console can control it directly. 

https://www.gree-leds.com/dmx512-digital-tape/ucs512a-rgb-strip-24v.html

Before lighting on led strip, We must write address code in single-line/Double-line DMX512 digital led strip‘s chip by DMX address editor. 

Double-line DMX512 digital led strip wiring as below:

Single-line DMX512 digital led strip wiring as below:

the important parameters of led color: luminous efficacy, CRI and R9 (high luminous efficacy and high CRI led strip)

The higher the luminous efficacy of the LED is, the lower the color rendering index (CRI) is? And the importance of R9 spectrum 

The higher the luminous efficacy of the LED is, the lower the color rendering index is? No, this theory is clearly unsustainable. The causality of this logic is reversed. Not the luminous efficacy is low, so the CRI is high. But to improve CRI, so we have to sacrifice some luminous efficacy. However, many people still have misunderstandings about the luminous efficacy, they thought Luminous efficacy is Luminous effect.

Luminous Efficacy: The luminous flux (lm) emitted by an LED light source divided by the

power consumed by the light source (W) is called the luminous

efficiency of the LED, The unit is  lm/W. 

Luminous effect refers to the visual effect. So it is different from Luminous Efficacy.

They are two different concepts.

Factors Influencing Color Rending Index (CRI)：

Most commercial LED chips are coated with yellow phosphor (YAG), which can be stimulated by the blue light, we usually call it yellow powder. The blue light emitted by the chip complements and the yellow light emitted by the phosphor powder, synthesize the  white light.

If you want to improve the color rendering of LED, you need to involve the calculation of color rendering index. Generally, the calculation of color rendering index is R1-R8, and the chromatogram is relatively narrow.

But there is still a lack of a very important spectrum, which is the special reference R9, red R9 (saturated red color),it is an index to evaluate the quality of red reproduction. For their application studios and other occasions that need to truly reproduce skin color, as well as for the color reduction of fresh meat and vegetables has an irreplaceable role.

R9 is also an important indicator to measure the color rendering of LED. You will notice it from the following pictures, the greater the R9 is, the better the red color of vegetables and fruits is.

How Greeled improve the color rendering index of LED?

There is a saying "what is missing, to make up for what", which can not be used here more accurately. As it is missing R9, so "make up R9", then how to make up for it?
Adding red phosphor can make up for the deficiency of red spectrum of LED and adjust the color index of white LED. For example, if the original color index of an LED is 70, it may only need a little red phosphor to increase the color index of 80. To achieve the color index of 90, It is necessary to increase the concentration of red powder by multiple. 

GREELED have SMD led chips which have high luminous efficacy and high CRI at the same time, we also supply the high luminous efficacy and high CRI led strips series. If any question, pls email to:  marketing@gree-leds.com

Greeled Neon led tube ribbons

NEON LED TUBE LIGHT

Greeled Neon led tube ribbons are with the new silicone integrated extrusion molding technology, using enviroment-friendly and UV-resistant silicone materials. They have excellent pliability to shape optionally, they are uniform and soft luminance, dot-free, high brightness and even mixture of colors. They are IP67 waterproof level for outdoor using. 

We have the following different kinds of neon led tube lights.

A1 series :12mm*22mm, 270degree View angle. Mainly used for below products 

(with max 10mm width PCB):

Digital led strip series: WS2811/UCS1903/SM16703 12V addressable led strip, WS2815 12V addressable led strip, GS8208 Interior chip led strip, GE8808 Interior chip led strip. 

Analog led strip series: SMD2835 led tape, SMD3014 led tape, Constant currant led tape,

High efficacy led tape.

LED QTY requirements: More than 60leds Per meter.   Voltage Requirements: DC12V/DC24V

A2 series: 12mm*20mm, 120degree View angle, Mainly used for below products 

(with max 10mm width PCB):

Digital led strip series: WS2811/UCS1903/SM16703 12V addressable led strip, WS2815 12V addressable led strip, GS8208 Interior chip led strip, GE8808 Interior chip led strip. 

Analog led strip series:  SMD2835 led tape, SMD3014 led tape, Constant currant led tape, 

High efficacy led tape.

LED QTY requirements: More than 60leds Per meter.   Voltage Requirements: DC12V/DC24V

A3 series: 9.5mm*18mm,120degree View angle, Mainly used for below products 

(with max 10mm width PCB):

Digital led strip series: WS2811/UCS1903/SM16703 12V addressable led strip, 

WS2815 12V addressable led strip, GS8208 Interior chip led strip, 

GE8808 Interior chip led strip. 

Analog led strip series: SMD2835 led tape, SMD3014 led tape,Constant currant led tape,

High efficacy led tape.

LED QTY requirements: More than 60leds Per meter.   Voltage Requirements: DC12V/DC24V

A4 series: 8mm*15mm,160degree View angle, Mainly used for 5mm width SMD2835 led strip

LED QTY requirements: More than 60leds Per meter.        Voltage Requirements: DC24V

A5 series: 13mm*12mm,160degree View angle, it is suitable for Digital led strip and 

Analog led strip with 10mm width PCB. 

Digital led strip series: WS2811/UCS1903/SM16703 12V addressable led strip, 

WS2815 12V addressable led strip, 

                   GS8208 Interior chip led strip,GE8808 Interior chip led strip. 

Analog led strip series: SMD2835 led tape, SMD3014 led tape,Constant currant led tape,

High efficacy led tape.

LED QTY requirements: More than 60leds Per meter.   Voltage Requirements: DC12V/DC24V

A6 series: 6mm*12mm,160degree View angle, Mainly used to 8mm width SMD2835 led strip

LED QTY requirements: More than 60leds Per meter.        Voltage Requirements: DC24V

A7 series :10mm*20mm,120degree View angle. Mainly used to Digital led strip or 

Analog led strip with Max 12mm width PCB.

Digital led strip series: Suitable for all led strips of A1 series. 12V 48 leds/m WS2801 led strip,

GS8208 led strips 144leds/m, WS2815 led strips 144leds/m

Analog led strip series: Max PCB width 12mm ‘ SMD2835 led tape, SMD3014 led tape,

Constant currant led tape,High efficacy led tape.

LED QTY requirements: More than 48leds Per meter.   Voltage Requirements: DC12V/DC24V

A8 series (Newest) :12mm*25mm ,270 degree View angle. Used for Digital led strip or 

Analog led strip with Max 12mm width PCB:

Digital led strip series: Suitable for all led strips of A1 series. 

12V 48 leds/m WS2801 led strip,

GS8208 led strips 144leds/m, WS2815 led strips 144leds/m

Analog led strip series: Max PCB width 12mm, SMD2835 led tape, SMD3014 led tape, 

Constant currant led tape, High efficacy led tape.

LED QTY requirements: More than 48leds Per meter.   Voltage Requirements: DC12V/DC24V

x

WS2811 60leds Flex led Neon-Programmable

Digital Flex led Neon-Addressable Neon Rope
WS2811 60leds Flex led Neon-Programmable
Individually addressable Flexible Neon strip

1. Input Voltage DC12V, single signal (Data) control. WS2811 IC Protocol .
2. 60leds/m, SMD5050, RGB Color. Each three leds are addressable.
3. Anti-yellowing and heat resisting 12mm(W)*22mm(H) silicon neon tube available.
4. 270 degree beam angle,Uniform and soft luminance, no light spot.
5. 3OZ Thickness Double-layer PCB.  Max 14.4W/M power comsuption.
6. Both ends wired with 150mm/5.9" 20Awg wire and JST 3Pin male/female connector
7. Single end feed power, it is 5M/roll.  if feed power both ends, the length is 10M/Roll.
8. IP67 Waterproof rank, available for extremely terrible outdoor environment
9.  Two Piece aluminium alloy clasps per meter
10. Controller System：SD controller , DMX controller , Artnet.

3pin jst sm connector with dc connector

3pin jst sm connector with dc connector
easy to connect with power supplier

5pin 12mm hippo led connector for RGBW RGBY strip

for RGBW,RGBY IP21 non-waterproof or IP65 sealing glue waterproof led strip,solder-less,non-soldering  marketing@gree-leds.com
5pin 12mm hippo led connector

4pin 8mm 10mm hippo connector

fastest and most convenient way to connection,welding soldering free,Strip to strip type or Strip to wire type,waterclear Polycarbonate shell

4pin hippo led connector including:
8mm 4pin hippo connector for IP21 non-waterproof flex led tape
8mm 4pin hippo connector for IP65 glue-sealing waterproof flex led tape
10mm 4pin hippo connector for IP21 non-waterproof flex led tape
10mm 4pin hippo connector for IP65 glue-sealing waterproof flex led tape

2PIN Hippo-M Solderless Connector

Hippo-M Connector is an excellent and reliable way of joining LED strip to strip,or strip to cable wire. Simply choose the correct size Hippo connector, insert the strip and close the connector until it latches. This will make a strong physical and electrical connection ensuring a reliable joint.
Note: Once closed the connector cannot be re-used.

2pin hippo led connector including:
5mm 2pin hippo led connector: for 5mm width single color led strip
8mm 2pin hippo led connector: for 8mm width single color led strip
10mm 2pin hippo led connector: for 10mm width single color led strip

All the above hippo connectors have two modes:
for IP21 non-waterproof led strip
for IP65 sealing glue waterproof led strip