Model No.:GECOSD1P-2048
Input Voltage:DC5V,DC7.5-24V
Product Size:L165*W80*H30mm, Net weight: 300g
SPI Signal Output,One controller Max control 2048 Pixels
LEDEDIT software make programs ,Copy files to SD card.
File Memory Type:00_1.led,01_1.led, Max 16 files
Can Control led products with the following IC:
LPD6803, LPD8806, WS2801,WS2811,LPD6813, LPD1886,UCS6909, UCS6912, UCS1903,UCS1909,UCS1912,TLS3001,TM1812,TM1809,TM1804,TM1803, DZ2809,WS2801,SD600,D705,P9813,SM16716, DMX512, etc.
4096 pixels led controller
Model No.:GECOSD4P-4096
Input Voltage:DC5V
Product Size:L170*W91*H31mm, Net weight: 360g
SPI/TTL Signal Output,Four output port ,Max control 4096 Pixels
LEDEDIT software make programs ,Copy files to SD card.
File Type:00_1.led,01_1.led, Max 16 files
Can Control led products with the following IC:
LPD8806, WS2801,WS2811,LPD6813, UCS6909, UCS6912 UCS1903,
UCS1909,UCS1912,TLS3001,TM1812,TM1809,TM1804,TM1803, DZ2809,SD600,D705,P9813,SM16716,etc
8192pixel digital led controller
Model No.:GECOSD8P-8192
Input Voltage:DC5V
Product Size:L200*W170*H50mm, Net weight: 1500g
SPI/TTL Signal Output,eight output port ,Max control 8192 Pixels
LEDEDIT software make programs ,Copy files to SD card.
File Type:00_1.led,01_1.led, Max 16 files
Can Control led products with the following IC:
LPD8806, WS2801,WS2811,LPD6813, UCS6909, UCS6912 UCS1903,
UCS1909,UCS1912,TLS3001,TM1812,TM1809,TM1804,TM1803, DZ2809,SD600,D705,P9813,SM16716,etc
PC on-line broadcast controller
Model: GECOSDT200K
Parameters
Working temperature : -30℃—85℃
Weight: 2.0KG
Working voltage: AC220V
Working power: 8W
Size: L270mm×W180mm×H55mm
Signal port: 3pin connect port
Features
1.32—256 Gray level，Support software Gamma correction.
2. Support the rules and special-shaped handle.
3. 8 ports output，one port can support 512-1024 pixels.
4. offline (SD card) control and on-line control can be combined using multiple controllers, the contents of the offline control program stored in the SD card.
5. Compatible with single line or double line chips.
6. If the controller to the lamps distance can choose optoelectric isolated transmission and as far as several distances of up to 200-300 M
Working Voltage： DC12-24V（RT Open）/ DC5V（RT short）
Power consumption： 1W
Size： L40mm*W30mm*H10mm.
Input：IGND（GND input） IDAT（DAT input） ICLK（CLK Input）
Output：GND（GND Output） DAT（DAT Output） CLK（CLK Output）
Transfer distance：Max 200 meters between controller and TTL signal receiver board.
supply voltage:DC5V or DC12-24V
Notes: we have DC5V and DC12-24V two type remote digital led controller.
output: two group SPI signals
Control WS2811,UCS1903 Chips
4keys Remote fuction
Built-in 133 change modes
Control Pixel QTY: each group drive Max 1024 pixels
Remote distance:30meter
Rated power:2.2W
It can drive LPD6803,TM1803,TM1809,TM1812,UCS1903,WS2801,WS2811,TLS3001,
TLS3008,P9813 Total 10 kind digital led strip so far
one set WIFI controller include controller,software and remote control unit
WIFI Controller Parameter:
1. Working voltage: DC5--24V
2. Output control: SPI signal output
3. Output current: 4A*3
4. Connect mode: SPI signal wires(DATA, CLK)
5. External dimension: L107*W65*H30（mm）
6. Receiving sensitivity: 802.11b DSSS(-5dBm)，802.11b CCK (-10dBm)，802.11g OFDM(-15dBm)
Remote control parameter:
1. Working temperature: -20-60℃
2. Power supply method: AAA*3
3. Supply voltage: 1.5V*3
4. Standby power: 0.015mW
5. Standby current: 3uA
6. Working current: 200uA
7. Emission current: 10mA
8. Remote control distance: about 30m
Software specification:
1. Name. Magic Color
2. Runtime platform: Android version support Android system(better one can support Samsung,
HTC), IOS version support IOS system, equipment must have WiFi function.
3. Language: English
4. Category: communications
5. Free, green, no plug-ins
working temperature: -20-60℃
Input 1 group SPI signal
Output 8 group SPI signal
SPI signal type, single line (DAT), two line (DAT.CLK),Three line( DAT,CLK,LCH)
supply voltage: DC12-24V
output: 8 SPI signal
net weight: 420g
gross weight: 450g
external dimension: L140 Χ W 70 Χ H25mm
packing size: L148 Χ W76 Χ H48mm
Input voltage DC5V～DC24V
Input signal DMX512/1990
Output signal : GEDMX512-LPD8806(For LPD8806,LPD8803)
GEDMX512-WS2801 (ForWS2801,WS2803)
GEDMX512-TM1809 (For TM1803, TM1804,TM1809, TM1812 WS2811)
Decoder channels 512 DMX CH/unit
Grey Scale 256 levels/CH (8bit/CH)
DMX512 socket Standard XLR-3 connector
working temperature -30℃～65℃
Dimension L125×W52×H40mm
Package Size L135×W70×H50mm
Weight (G.W) 300g
DMX-SPI signal decoder is to convert the DMX512 digital signal into SPI(TTL) digital signal. It can work on the DMX console to control the LED lights with compatible driving ICs. DMX console can control every channel of the LED Lights, realizing 0-100% dimming and various changing effect.
Our DMX-SPI decoder can simply turn normal LED digital light to DMX512 LED light with international standard communication protocol, which is easy to promote in the international market.
DMX-SPI decoders are widely used in the digital addresable LED string light, digital LED pixel lights, LED digital tube, and kinds of LED digital lights .
Hello, an amazing Information dude. Thanks for sharing this nice information with us. LED Controllers
回复删除